service: air and compatible gases, any type particulate conductive or nonconductive.wetted materials: 304 ss and ptfe.air velocity range: 300 ft/min and higher.minimum detection: standard: 10.0 pa, optional: 5.0 pa and 0.5 pa.temperature limits: ambient: -15 to 160°f (-25 to 70°c); process: standard: -40 to 250°f (-40 to 120°c); optional: -40 to 450°f (-40 to 232°c).pressure limit: 10 psi (0.69 bar).power requirement: 18-28 vdc (24v nominal).output signal: 4-20 ma.loop resistance: 300 ohms maximum.current consumption: powered from 4-20 ma loop.electrical consumption: terminal block.process connection: see model chart on ordering page.enclosure rating: weatherproof, nema 4x (ip 66).mounting orientation: any.weight: varies with length of probe and type of mount.agency approvals: ce ordinary locations only, csa
选型表
| example |
pmt |
a1 |
1 |
t1 |
p1 |
1 |
l1.5 |
pmt-a11t1p1-l1.5 particulate transmitter, ordinary/general purpose locations, ce approval, nema 4x, csa, , 1/2" npt connection, 250°f max. temp., 10 psi max. pressure, 10.0-5000 pa, 1.5" probe. |
| series designator |
pmt |
|
|
|
|
|
|
pmt particulate transmitter (1-piece configuration, sensor included in price) |
| enclosure rating |
|
a1ahz2 |
|
|
|
|
|
ordinary/general purpose locations, ce approval, nema 4x, csa hazardous location, csa approval, class i, division ii, groups a-d; class ii, groups f,g |
| process connection |
|
|
1234 |
|
|
|
|
1/2" npt1.5" sanitary connection2" 150# ansi flange2" 150# ansi flange with process mating flange and installation kit. |
| maximum processtemperature |
|
|
|
t1t2 |
|
|
|
250°f (121°c)450°f (232°c) |
| maximum processpressure |
|
|
|
|
p1 |
|
|
10 psi |
| range |
|
|
|
|
|
123 |
|
10.0-5000 pa5.0-5000 pa0.5-5000 pa (required for low levels or epa leak detection) |
| in-sertion length(recommended at least 1/2 duct diameter) |
|
|
|
|
|
|
l1.5l03l05l10l15l20l30l36 |
1.5" probe3" probe5" probe10" probe15" probe20" probe30" probe36" probe | |
榜上有名会员 第 2 年】
MSN交谈
您所在位置：首页 > 供求商机 > PMT系列尘埃浓度变送器 
